Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.
beauagsan

The concrete floors Diaries







Todd, I had been just asking yourself If you had to make a choice from dri core and barricade which would you choose? Many thanks

With the recommendation and enable out of your internet site I've insulated my basement partitions and I am preparing with the floors. I'm going to make use of the one″ foam and after that the 3/4 Advantech ply on top rated. I have an issue re the adhesive for your floor. I had been “bought” some PL200 that was proposed to me from the Foam distributor – “that’s what All people uses” I used to be advised; nonetheless, I took your suggestions over the partitions and utilized The good things foam sealant/glue and it worked rather well.

The trick to quick screeding is to have a helper which has a rake shifting the concrete in front of the screed board. You'd like sufficient concrete to fill all voids, but not a great deal that it’s hard to pull the board.

Thanks once more for all your time and efforts with the article, and I really liked the solutions to the concerns of Other individuals you supplied to Other folks on this website page.

You can purchase anti-fatigue mats comprised of rubber, carpet, vinyl or Wooden. Working with anti-tiredness mats can assist protect against discomfort as part of your ft from standing, but standing for a long timeframe could continue to lead to you to develop again agony, even with the mats.

four. Removing residue and neutralizing the area is essential for the achievement of the acid-stained concrete end. Residue with the acid etching has to be taken out, and the floor need to be neutralized to ensure good adhesion on the sealant or coating process.

Even if you employ the top acid-stain concrete contractor in your neighborhood, his talents will depend upon the floor he'll operate with. It is probably not attainable to totally hide and blend in colour on the poorly stained and destroyed concrete slab.

Thanks for all the data. I am taking away drywall from finished, uninsulated stud walls in my basement and may have closed mobile spray foam utilized. For my concrete floor I would like to use one″ xps and doubtless advantech on prime. Issue #one – Would an adhesive be enough for Keeping the concrete, xps and advantech with each other devoid of fasteners?

Just a little worried about top (will require to chop bi-fold doorways down), but nonetheless choose to get decent insulation to possess a heat floor.

three. The Sleepers are not always wanted. We’ve truly completed it both equally approaches. When you use sleepers It appears to work better connecting them to your floor then screwing the plywood down.

Once the undertaking is full, you should seal it. It's possible you'll choose a sealant that gives texture that site and eradicates slips, but definitely avoid sealants that become slippery when soaked for exterior projects.

Curing compound is obtainable in your own home centers. Adhere to the Guidelines over the label. Use a regular backyard garden sprayer to apply the compound. It is possible to lay plastic over the concrete alternatively, Whilst this can lead to discoloration of your area.

Foam is used underneath your streets Specifically around bridges. If it could assist tractor trailers I believe you’ll be fantastic. Just be certain you employ a dense foam.

Phil – You’re on the correct observe. The sole other query is whether you might have a lot of humidity underneath the slab, do you might have less than slab drains? any signs of excess dampness? Whether it is dry Traditionally then I say you’re Okay.

Don't be the product, buy the product!

Schweinderl